End-to-End Mold Solutions from Design to Production
One-stop mold partner covering high-precision mold design, fabrication, and modification for complex geometries
| Machine Type | Conventional Lathe |
| Manufacturer | Gwangju Namseon Lathe Co., Ltd. |
| Swing over Bed | Ø400 mm |
| Swing over Saddle | Ø236 mm |
| Swing in Gap | Ø600 mm |
| Distance between Centers | 750 mm |
| Spindle Bore Diameter | Ø52 mm |
| Spindle Bore Taper | M.T #6 |
| Spindle Speed Steps | 12 steps |
| Spindle Speed Range | 20 ~ 1,500 rpm |
| Machine Type | Die Sinking EDM |
| Manufacturer | ZEUS Humantech Co., Ltd. |
| Tank Size | 1,100 × 650 × 400 mm³ |
| Work Table Size | 700 × 400 mm² |
| X / Y / Z Travel | 450 × 350 × 200 mm |
| Max Workpiece Weight | 450 kg |
| Max Electrode Weight | 85 kg |
| Machine Type | Universal & CNC Combined Milling Machine |
| Table Size | 1,100 × 280 mm |
| X / Y / Z Travel | 700 / 320 / 400 mm |
| Max Table Load | 300 kg |
| Spindle Taper | NT40 |
| Spindle Speed | 75 ~ 5,000 rpm |
| Spindle Motor | 2.2 kW |
| X / Y / Z Rapid Feed | 5 / 3 m/min |
| Head Swivel Angle | ±90° |
| Machine Type | Conventional Surface Grinding Machine |
| Brand | CRYSTAL |
| Table Working Surface | 450 × 150 mm |
| Longitudinal Travel (X) | 470 ~ 500 mm |
| Cross Travel (Y) | 170 ~ 200 mm |
| Vertical Travel (Z) | 400 ~ 450 mm |
| Grinding Wheel Size | Ø180 × 13 × Ø31.75 mm |
| Spindle Motor Output | 1.1 kW |
| Machine Weight | approx. 900 ~ 1,000 kg |
Carbon alloy steel (HRC 18–20) with good machinability and low heat-treatment distortion. Used for general injection mold bases and large molded parts where ultra-high precision is not required.
Pre-hardened steel (HRC 40–48) ready to machine without additional heat treatment. Suitable for small-to-medium cores and cavities, rubber compression molds, and PVC extrusion dies.
Ni-Cr-Mo pre-hardened steel (HRC 35–45) optimized for large and medium-large molds. Used for TV housings, refrigerator and washing machine cabinets, and automotive bumper molds.
KP4M large-format molds applied to PP and ABS bumpers, door trims, and side mirror housings. Excellent dimensional stability and shot-to-shot repeatability meet automotive OEM line requirements.
Within ±0.2 mm
Dimensional tolerance for large exterior parts
STAVAX ultra-mirror molds applied to PC/ABS smartphone cases and laptop top/bottom housings. Class-A surface quality achieved to minimize post-plating and painting processes.
Ra 0.01 μm
Mirror-polished surface roughness
STAVAX corrosion-resistant molds used for ABS and PP diagnostic device housings and disposable medical parts. Compatible with medical-grade resins and designed for clean-room molding environments.
ISO 13485 compliant
Medical device quality management standard
KP4M large injection molds applied to ABS/PC TV bezels and washing machine/refrigerator control panels. Optimized gate and cooling design minimizes warpage for consistent surface finish and dimensional accuracy.
Shrinkage ≤ 0.4%
Panel molding deformation rate
NAK80 mirror-finish molds applied to PMMA display light guides and automotive lamp lens covers. Ultra-precision polishing leveraging age-hardened steel minimizes optical transmittance loss.
Transmittance ≥ 92%
PMMA lens cover molding quality
SKD11 cold-work tool steel molds applied to POM/PBT electrical connectors, switch housings, and precision gears. High hardness and wear resistance maintain dimensional stability through multi-million-shot production runs.
Mold life ≥ 3M shots
Long-term durability for connector molds
Our expert engineers will propose the optimal solution.
Contact Us